Hardware: Basic E-Field Sensor Board
Basic E-Field Sensor Board. Designed for UW CSE Software for embedded systems class.
For the Winter 2009 offering of the University of Washington CSE Software for Embedded Systems course, I designed a laboratory assignment around electric field sensing. In the lab, students used an 8-bit microcontroller to accomplish the following:
- generate a waveform at a specific frequency to drive a resonant transmitter
- synchronously sample a received signal with an analog/digital converter
- demodulate the received signal in software to recover the signal magnitude
- use pulse-width modulation to drive an RGB LED, varying its color with the sensed distance between the sensor and the user's hand
For the lab, I developed a custom PCB that contains both the transmit and receive electrodes, as well as the resonant tank for the transmitter and the analog front-end for the receiver. Header pins along the front edge of the board enabled students to plug the unit into their breadboards for connection to their microcontroller circuits. Placing the portions of the circuit that were sensitive to layout and breadboard capacitance on the PCB enabled students to focus on the objectives of the lab assignment rather than on debugging layout problems.
I designed the board to be easy to assemble; the students computed the frequencies that they would use based on the capabilities of their microcontroller and the parts available in the lab, then selected components and assembled the boards themselves. Several pads for various capacitors were provided for frequency selection.
E-field sensor board in action.